SMA STP 8000TL-10 - Manual (Page 81)

SMA Solar Technology AG 11 Messages
Installation Manual STP8-17TL-IA-en-31 81
7106 < Update file defect. > • Re-format the SD card.
• Re-save the files to the SD card.
7110 < No update file found > • Copy the update file into the
SD card drive :\UPDATE directory.
7201,
7202 < Data stor. not poss. >
An internal device fault that does not
prevent the inverter from feeding power to
the grid. • If this error occurs frequently, contact
the SMA Service Line
(see Section 16 "Contact",
page 126).
7303 < Update main CPU failed >
Internal device fault. • Contact the SMA Service Line
(see Section 16 "Contact",
page 126)
7305 < Update RS485i module failed >
An internal device fault that does not
prevent the inverter from feeding power to
the grid. • Re-try update.
• If this error occurs again, contact the
SMA Service Line (see Section 16
"Contact", page 126).
7307 < Update BT failed >
An internal device fault that does not
prevent the inverter from feeding power to
the grid.
7309 < Upd. display failed >
An internal device fault that does not
prevent the inverter from feeding power to
the grid.
7311 < Update language table failed >
An internal device fault that does not
prevent the inverter from feeding power to
the grid.
7324 < Wait for update conditions > • Ensure that there is DC supply to the
inverter and that it feeds more than
1,000 W into the electricity grid for
over 1 minute.
7401 < Varistor defective >
At least one of the thermally monitored
varistors is defective. • Check varistors (see Section 12.3
"Checking the Function of the
Varistors", page 87).
7501 < Fan fault >
< Clean fan >
One of the internal fans is blocked. • Check heat dissipation
(see Section 10.2 "Checking Heat
Dissipation", page 67).
Event no. Display message and cause Corrective measures