SMA STP 8000TL-10 - Manual (Page 24)

5 Mounting SMA Solar Technology AG
24 STP8-17TL-IA-en-31 Installation Manual
3. Hook the inverter into the rear panel, ensuring that
the inverter enclosure is positioned flush against the
rear panel.
– For two people to transport the inverter, hold the
inverter by the recessed grips at the bottom and
the top edge of the enclosure lid.
– For transport by crane, you can attach 2 ring
bolts to the top of the inverter (see A: M10,
diameter = 10 mm). To do this, remove the
filler-plugs and screw in the ring bolts as far as
they will go.
4. Remove the ring bolts after transport and re-attach
the filler-plugs.
5. Release all 6 captive screws of the lower enclosure
lid.
6. To remove the lower enclosure lid, lift it from the
bottom.
A