SMA STP 8000TL-10 - Manual (Page 44)

6 Electrical Connection SMA Solar Technology AG
44 STP8-17TL-IA-en-31 Installation Manual
8. In order to seal the inverter, all DC inputs that are
not required have to be closed as follows:
– Insert the sealing plugs provided into the DC
connectors that are not required. Do not insert
sealing plugs into the DC inputs on the inverter.
– Insert the DC connectors with sealing plugs into
the corresponding DC inputs on the inverter.
9. If the Sunny Tripower does not beep or display an
error message, disconnect the Electronic Solar
Switch.
☑ The display switches off.
☑ You can now commission the inverter (see Section 7 "Commissioning", page 58). The following
connections and settings are optional.