SMA STP 8000TL-10 - Manual (Page 63)

SMA Solar Technology AG 9 Disconnecting the Inverter from Voltage Sources
Installation Manual STP8-17TL-IA-en-31 63
9 Disconnecting the Inverter from Voltage Sources
9.1 Safety
Danger to life due to high voltages in the inverter
Death from electric shock
The inverter operates at high voltages and must be disconnected prior to carrying out work on the
device. Furthermore, if the DC connectors are pulled out without first unplugging the Electronic Solar
Switch, a dangerous electric arc can occur.
• Disconnect the inverter as described in the following section.
Risk of burns due to hot DC lid
During operation, the DC lid on the left-hand side of the connection area can get hot.
• Take care not to touch the DC lid when working in the connection area.
Electrostatic discharge can damage the inverter
Internal components of the inverter can be irreparably damaged by electrostatic discharge.
• Earth yourself before touching any components.