SMA STP 8000TL-10 - Manual (Page 10)

2 Safety SMA Solar Technology AG
10 STP8-17TL-IA-en-31 Installation Manual
When designing the PV plant, ensure that the permitted operating range of all components is
complied with at all times. The free design program "Sunny Design", version 2.0 or higher
(see www.SMA.de/en/SunnyDesign) will assist you in this. The manufacturer of the PV modules must
have approved the PV modules for use with the Sunny Tripower. You must also ensure that all
measures recommended by the module manufacturer for the long-term maintenance of the module
properties are taken (see also Technical Information "Module Technology" at www.SMA.de/en).
Do not use the Sunny Tripower for purposes other than those described here. Alternative uses,
modifications to the Sunny Tripower or the installation of components not expressly recommended or
sold by SMA Solar Technology AG void the warranty claims and operation permission.
2.2 Safety Precautions
Danger to life due to high voltages in the inverter
• All work on the inverter must be carried out by skilled persons only.
Risk of burns due to hot enclosure parts
During operation, the upper enclosure lid and the enclosure body may get hot.
• Only touch the lower enclosure lid during operation.
Possible damage to health due to radiation effects
• Maintain a distance of at least 20 cm from the inverter whenever possible.
Earthing of the PV array
Comply with the local regulations for earthing the modules and the PV array.
SMA Solar Technology AG recommends the continuously conductive connection and earthing
of the array frame and other electrically conductive surfaces in order to ensure maximum
protection for property and persons.