SMA STP 8000TL-10 - Manual (Page 22)

5 Mounting SMA Solar Technology AG
22 STP8-17TL-IA-en-31 Installation Manual
• Observe the recommended clearances to walls,
other inverters or other objects, as shown in the
diagram. That ensures sufficient heat dissipation
and gives you enough space to unplug the
Electronic Solar Switch.
• If multiple inverters are mounted in areas with high
ambient temperatures, allow more than the
recommended clearances between the inverters
and ensure an adequate fresh-air supply. This will
prevent the inverter from reducing its power as a
result of high temperatures (details on temperature
derating can be found in the Technical Information
"Temperature Derating" at www.SMA.de/en).
5.3 Mounting the Inverter with Rear Panel
1. Use the rear panel as a drilling template and mark the positions of the drill holes.