SMA STP 8000TL-10 - Manual (Page 37)

SMA Solar Technology AG 6 Electrical Connection
Installation Manual STP8-17TL-IA-en-31 37
6.4.2 Assembling the DC Connectors
For connection to the inverter, all connection cables of the PV modules must be equipped with the
DC connectors provided.
Assemble the DC connectors as follows. Be sure to observe the correct polarity. The DC connectors
are marked with the symbols "+" and "‒".
Cable Requirements
• Use a PV1-F cable.
Procedure
1. Lead the stripped cable all the way into the plug.
2. Push the clamping bracket down.
☑ The clamping bracket clicks audibly into place.
3. Ensure that the cable is correctly positioned:
... ...