1 information on this document, 1 validity, 2 target group – SMA CLUSTER CONTROLLER Installation User Manual
Page 9: 3 additional information, 4 symbols, Information on this document, Validity, Target group, Additional information, Symbols
1
Information on this Document
1.1
Validity
This document is valid for the SMA Cluster Controller (models "CLCON-10" and "CLCON-S-10")
from hardware version A1 and from firmware version 1.0.
1.2
Target Group
The tasks described in this document must only be performed by qualified persons. Qualified
persons must have the following skills:
• Knowledge of how an inverter works and is operated
• Training in how to deal with the dangers and risks associated with installing and using
electrical devices and installations
• Training in the installation and configuration of IT systems
• Training in the installation and commissioning of electrical devices and installations
• Knowledge of the applicable standards and directives
• Knowledge of and compliance with this document and all safety information
1.3
Additional Information
Links to additional information can be found at
Document title
Document type
"SMA SPEEDWIRE FIELDBUS"
Technical Information
1.4
Symbols
Symbol
Explanation
Indicates a hazardous situation which, if not
avoided, will result in death or serious injury
Indicates a hazardous situation which, if not
avoided, can result in death or serious injury
Indicates a hazardous situation which, if not
avoided, can result in minor or moderate injury
Indicates a situation which, if not avoided, can
result in property damage
Information that is important for a specific topic
or goal, but is not safety-relevant
Indicates a requirement for meeting a specific
goal
Desired result
A problem that might occur
1 Information on this Document
SMA Solar Technology AG / SMA America, LLC
Installation Manual
9
ClusterController-IA-en-14