SMA SUNNY HOME MANAGER - Manual (Page 92)

11 PV System Monitoring SMA Solar Technology AG
92 HoMan_Portal-BA-en-17 User Manual
Procedure:
1. Select Configuration > Report configuration in the page and menu selection.
2. Select the desired report in the Report configuration drop-down list.
3. In the field Report date in the Regenerate report manually area, enter the date for which
you wish to create a report. Tip: click the calendar icon and select a date in the calendar.
4. Select [Generate].
☑ A message that the report has been successfully sent is displayed.
11.4 Setting Communication Monitoring
In case the Sunny Home Manager does not communicate with Sunny Portal, you can set the time
which should elapse before Sunny Portal reports an error and notifies you by e-mail.
The time which should elapse before the error is displayed and you are notified by e-mail is defined
in the following settings:
• Alarm
• Data request interval (see Section 8.7 "Setting the Data Request Interval", page 56)
Requirement:
☐ You must have the user role Installer or PV system administrator (see Section 13.1 "Users
and User Rights", page 108).
Procedure:
1. Select PV system monitoring in the page and drop-down menu.
2. In the area Communication monitoring, select [Settings].
☑ The page Configuration communication monitoring opens.
3. Click the slider and, holding the left mouse button pressed, set how quickly Sunny Portal is to
report an error and notify you by e-mail:
Alarm Data request interval Time
Off Automatic Communication monitoring is
deactivated.
Hourly
Daily
Tolerant Automatic 3:15 h
Hourly 4:00 h
Daily 27:00 h
Moderate Automatic 1:15 h
Hourly 2:00 h
Daily 25:00 h