HEIDENHAIN iTNC 530 (340 49x-02) ISO programming - Manual (Page 586)

586 14 Tables and Overviews
14.1 Gener
a
l User P
a
ra
met
e
rs
Display step for the
spindle position MP7289
0.1 °: 0
0.05 °: 1
0.01 °: 2
0.005 °: 3
0.001 °: 4
0.0005 °: 5
0.0001 °: 6
Display step MP7290.0 (X axis) to MP7290.13 (14th axis)
0.1 mm: 0
0.05 mm: 1
0.01 mm: 2
0.005 mm: 3
0.001 mm: 4
0.0005 mm: 5
0.0001 mm: 6
Disable datum setting
in the preset table MP7294
Do not disable datum setting: +0
Disable datum setting in the X axis: +1
Disable datum setting in the Y axis: +2
Disable datum setting in the Z axis: +4
Disable datum setting in the IVth axis: +8
Disable datum setting in the Vth axis: +16
Disable datum setting in the 6th axis: +32
Disable datum setting in the 7th axis: +64
Disable datum setting in the 8th axis: +128
Disable datum setting in the 9th axis: +256
Disable datum setting in the 10th axis: +512
Disable datum setting in the 11th axis: +1024
Disable datum setting in the 12th axis: +2048
Disable datum setting in the 13th axis: +4096
Disable datum setting in the 14th axis: +8192
Disable datum setting MP7295
Do not disable datum setting: +0
Disable datum setting in the X axis: +1
Disable datum setting in the Y axis: +2
Disable datum setting in the Z axis: +4
Disable datum setting in the IVth axis: +8
Disable datum setting in the Vth axis: +16
Disable datum setting in the 6th axis: +32
Disable datum setting in the 7th axis: +64
Disable datum setting in the 8th axis: +128
Disable datum setting in the 9th axis: +256
Disable datum setting in the 10th axis: +512
Disable datum setting in the 11th axis: +1024
Disable datum setting in the 12th axis: +2048
Disable datum setting in the 13th axis: +4096
Disable datum setting in the 14th axis: +8192
Disable datum setting
with the orange axis
keys MP7296
Do not disable datum setting: 0
Disable datum setting with the orange axis keys: 1
TNC displays, TNC editor