HEIDENHAIN iTNC 530 (340 49x-02) ISO programming - Manual (Page 419)

HEIDENHAIN iTNC 530 419
8.9
Coor
di
na
te
T
ra
n
s
for
m
a
ti
on Cy
cle
s
8.9 Coordinate Transformation
Cycles
Overview
Once a contour has been programmed, you can position it on the
workpiece at various locations and in different sizes through the use
of coordinate transformations. The TNC provides the following
coordinate transformation cycles:
Effect of coordinate transformations
Beginning of effect: A coordinate transformation becomes effective as
soon as it is defined—it is not called. It remains in effect until it is
changed or canceled.
To cancel coordinate transformations:
„ Define cycles for basic behavior with a new value, such as scaling
factor 1.0.
„ Execute a miscellaneous function M02, M30, or an N999999 %...
block (depending on MP7300).
„ Select a new program.
„ Program miscellaneous function M142 Erasing modal program
information.
Cycle Soft key Page
G54 DATUM
For shifting contours directly within the
program Page 420
G53 DATUM from datum table Page 421
G247 DATUM SETTING
Datum setting during program run Page 425
G28 MIRROR IMAGE
Mirroring contours Page 426
G73 ROTATION
For rotating contours in the working plane Page 428
G72 SCALING FACTOR
For increasing or reducing the size of
contours Page 429
G80 WORKING PLANE
Machining in tilted coordinate system on
machines with swivel heads and/or rotary
tables Page 430