HEIDENHAIN iTNC 530 (340 49x-02) ISO programming - Manual (Page 448)

448 9 Programming: Special Functions
9.2 Defining the Mac
h
ining Plane
with Space Angles: PLANE
S
P
A
TIAL
9.2 Defining the Machining Plane
with Space Angles:
PLANE SPATIAL
Function
Spatial angles define a machining plane through up to three rotations
around the fixed machine coordinate system. The sequence of
rotations is firmly specified: first around the A axis, then B, and then C
(the function corresponds to Cycle 19, if the entries in Cycle 19 are set
to space angles).
Before programming, note the following:
You must always define the three space angles SPA, SPB,
and SPC, even if one of them = 0.
The sequence of the rotations described above is
independent of the active tool axis.
Parameter description for the positioning behavior: See
“Specifying the Positioning Behavior of the PLANE
Function,” page 460.