Grass Valley K2 Media Client Service Manual v.3.3 - Manual (Page 65)

June 25, 2009 K2 Media Client Service Manual 65
Create the Control Team
5. Select the check box for …Adapter and …Adapter #3 . Click Next .
6. Select Switch Fault Tolerance . Click Next .
7. Click Finish and wait a few seconds for the adapters to be teamed.
8. Open the Modify Team dialog box as follows:
a. In Device Manager | Network Adapters, right-click Intel® Advanced Network
Services Virtual Adapters #2 (make sure it is the adapter identified as a Virtual
adapter) and select Properties . The Properties dialog box opens.
b. Select the Settings tab.