Grass Valley 3400 CopperHead - Manual (Page 56)

50
Connecting the Transceiver System
SMPTE Hybrid Fiber between the HDX Power Unit and Camera Unit
SMPTE Hybrid Fiber between the HDX Power Unit and Camera Unit
Fig. 5-5: SMPTE Hybrid Fiber between the HDX Power Unit and Camera Unit
• Between the Base Station (1) and the HDX Power Supply (4), connect a pair of ST Fiber
Cables (5).
• Power the External Water Power Supply locally by connecting to AC Power. Between
the External Wafer Power Supply (4) and the Camera Unit, connect a length of SMPTE
Hybrid Fiber Cable (3). At each end of the fiber cable, there must be an SMPTE 304M
Connector (7).
• The Base Station fiber connector (1) may be mounted either on the front or back of the
Base Station. The camera is powered by the CopperHead PowerPlus Camera Power
Supply (2).
• The Base Station is powered by connection to local AC power (6).