Grass Valley 3400 CopperHead - Manual (Page 40)

34
Component Detailed Description
Additional CopperHead 3400 Transceiver System Items
Additional CopperHead 3400 Transceiver System Items
Your CopperHead 3400 Transceiver System may consist of one or more of the following
items:
• Portable fiber reel with fiber per your purchase order
• Optional Universal Camera Control Unit (refer to the User’s Guide supplied with this
product)
• Optional “Power Wafer” Camera Adaptor
• Optional MPS External Power Wafer Power Supply
• Optional “PowerPlus” Camera Adaptor and Power Adaptor (refer to the User’s Guide
supplied with this product)
• Optional HDX Power Unit (refer to the User’s Guide supplied with this product)
Power Wafer Camera Adaptor
The CopperHead 3400 Camera Unit can be powered by the optional Power Wafer Camera
Adaptor. The Power Wafer replaces the local camera battery and any local AC power supply
adaptor. The Power Wafer gets its power from the use Hybrid fiber cable and the
CopperHead 3400 Base Station equipped with the internal power supply or from the MPS
external supply.
Up to 95 watts of 12VDC-14VDC power can be delivered to the camera, CopperHead
Camera Unit and camera powered accessories. Up to 780 feet (240 meters) of cable can be
used when the Camera Unit is powered directly from the Base Station.
The use of an external power supply can extend Base Station to Camera range and increase
camera power flexibility. The MPS “Throw Down” device or Wafer Power Adaptor provides
this functionality.
The Power Wafer replaces the battery or
local battery mount AC adaptor. Shown
with the V-Mount Battery Mount option.
A short jumper cable carries power from
the Camera Unit to the Power Wafer. The
power comes to the camera on the
power section of the Hybrid Fiber Cable.