Grass Valley 3400 CopperHead - Manual (Page 52)

46
Connecting the Transceiver System
Connections between the Base Station and the Camera Unit
Connections between the Base Station and the Camera Unit
The following table summarizes the various Fiber Cable connection options between the
CopperHead 3400 Base Station and the Camera Unit.
• The external Wafer Power Supply must be equipped with the required Fiber Cable
connectors depending on your system requirements.
• The external HDX Power Supply provides two ST Fiber Connectors for connection
between the HDX and the Base Station, and an SMPTE 304M Connector for connection
between the HDX and the Camera Unit.
The following fiber connection scenarios do not take into account any customized cable
and connector installations you may have at your facility. For assistance regarding more
complex connection situations, please contact Grass Valley, a Belden Brand (see
Contact Us
on page 83) or your local authorized dealer.
Cable Type
Base Station
Power
Camera Unit Power
Distance Range Between Camera
and Base
Tactical Fiber Internal Local Battery or AC
Power Up to 10 km
(This range can be extended to greater
than 20 km through use of the
optional High Power Laser - must be
ordered at time of purchase)
SMPTE Hybrid Fiber Internal Power Wafer Camera
Adaptor 240 meters
SMPTE Hybrid Fiber External – Wafer
Power Supply 95
Watts
1
Power Wafer Camera
Adaptor 5 km between base and power supply
240 meters between power supply and
camera
SMPTE Hybrid Fiber External – HDX
Power Supply –
150 Watts
2
CopperHead
PowerPlus Camera
Adaptor 5 km between base and power supply
3.2 km between power supply and
camera