Grass Valley 3400 CopperHead - Manual (Page 53)

47
CopperHead 3400
User Guide
Tactical Fiber between the Base Station and Camera Unit
Fig. 5-1: Tactical Fiber between the Base Station and Camera Unit
• Between the Base Station (1) the Camera Unit (2), connect a length of Tactical Fiber
Cable (3). At each end of the fiber cable, there is either an OpticalCON (4) or MX Fiber
Connector (5).
• The Base Station connector (4) may be mounted either on the front or at the back of
the Base Station. The camera must be powered by local power, either with a Battery or
with a local AC Power Supply (6).
SMPTE Hybrid Fiber between the Base Station (powered) and Camera Unit
Fig. 5-2: SMPTE Hybrid Fiber between the Base Station (powered) and Camera Unit
• Between the Base Station (1) and the Camera Unit (2), connect a length of SMPTE
Hybrid Fiber Cable (3).
• At each end of the fiber cable will be either an OpticalCON or SMPTE 304M Connector
(4) and (5).
• The Base Station connector (4) may be mounted either on the front or back of the Base
Station.
• The camera will be powered by the CopperHead Power Wafer Camera Power Supply
(6).
Note: Your configuration may have the OpticalCON or MX Fiber
Connector directly mounted on the Base Station Chassis.