Grass Valley 3400 CopperHead - Manual (Page 35)

29
CopperHead 3400
User Guide
• CABLE OPEN - indicates that the high voltage cable is open or there is no high
voltage cable connected.
• Green when the cable is properly connected from the Base Station to the
camera.
• Red when there is no cable connected to the camera or the cable is connected
but open.
High voltage will not be applied to the camera until the open condition is
corrected.
• CABLE SHORT - indicates that the high voltage cable connected is shorted.
• 18 - Power Switch & Power Indicator: toggle switch to enable or disable Base Station
power.
LED turns Green when on/off switch is changed to the ON position. With a hybrid
power system (power supplied by the Base Station), this switch will control power to
the Camera and the Camera Unit.
For the hybrid system to be properly powered, the AC Mains switch on the rear of Base
Station must be in the ON position.
Base Station Rear Panel
Fig. 3-21: CopperHead 3400 Base Station Back Panel
• A - Power & Fiber Connectors (see Rear Panel Section A - Power & Fiber Connectors
(Power Module) on page 30)
• B - Sync/Data/Control Connectors (see Rear Panel Section B – Sync/Data/Control
Connectors on page 32)
• C - Video/Ethernet Connectors (see Rear Panel Section C – Video/Ethernet Connectors
on page 32)
• D - Audio/Intercom Connectors (see Rear Panel Section D – Audio/Intercom Connectors
on page 33)