Grass Valley 3400 CopperHead User Manual
Page 50
44
Installing the Transceiver System
Relocation of the CopperHead 3400 Base Station Fiber connector
3 When the PowerPlus Unit is securely mounted to the CopperHead 3400 Camera Unit,
you must connect the supplied attached fiber cable connector between the
PowerPlus (1) and the Fiber connector on the Camera Unit (16).
Relocation of the CopperHead 3400 Base Station Fiber connector
The CopperHead 3400 Base Station may be configured with the Fiber Connector mounted
either on the back or the front of the Base Station. You may order your Base Station in either
configuration and it is possible to relocate the Fiber Connector from one position to the
other in the field.
Fig. 4-7: CopperHead 3400 Base Station with Front and Rear Mounted Fiber Connector
The Fiber Connector relocation process can be accomplished by a qualified
Grass Valley
technician in about 15 minutes or less. If you are performing the relocation process yourself,
you should budget a maximum time of one hour.
For a complete illustrated step‐by‐step procedure, contact Grass Valley, a Belden Brand
Note:
The HDX-2-ST Power Supply must be used in the PowerPlus
configuration. For configuration, see
Connecting the Transceiver System
.
Front Mounted Fiber Connector
Rear Mounted Fiber Connector