Grass Valley 3400 CopperHead - Manual (Page 41)

35
CopperHead 3400
User Guide
MPS External Power Wafer Power Supply (requires PowerWafer)
The CopperHead MPS external power supply provides 95 watts of 12VDC power and fiber
cable signal connectivity from the Base Station to the Camera Unit, using the CopperHead
PowerWafer. From the MPS unit to the camera can be configured using either a Hybrid
OpticalCON connector or an SMPTE 304M connector. The length available is up to 780 feet
(240 meters).
From the MPS unit to the Base Station can be configured using a non-hybrid OpticalCON
connector or two ST connectors. The length available is up to five kilometers (three miles).
The MPS is powered locally with standard AC power. The unit is free standing.
Fig. 3-27: - MPS External Power Wafer Power Supply
All MPS units require the Power Wafer to provide power to the Camera Unit. Four variations
are available with a different set of fiber cable connectors and all MPS units provide 95
watts of 12VDC power.
Part Number
Fiber Connection to
Camera Fiber Connection to Base
Station
CH2‐MPS‐95VD‐2ST‐NEU OpticalCON 2 STs
CH2‐MPS‐95VD‐2ST‐304 SMPTE 304M 2 STs
CH2‐MPS‐95VD‐NEU‐NEU OpticalCON (with power) OpticalCON (no power)
CH2‐MPS‐95VD‐NEU‐304 SMPTE 304 (with power) OpticalCON (no power)