Mounting the powerplus unit to the camera unit – Grass Valley 3400 CopperHead User Manual
Page 49
43
CopperHead 3400
User Guide
Mounting the PowerPlus Unit to the Camera Unit
This example illustrates the use of a camera with a V-Mount battery system. This case
illustrates a configuration where the camera is powered through the PowerPlus High Power
option. The PowerPlus Unit is powered through a Hybrid fiber cable which is powered from
the HDX Power Supply.
Fig. 4-5: Mounting the PowerPlus Unit to the CopperHead 3400 Camera Unit
To mount the PowerPlus Unit to the camera unit
1 The CopperHead 3400 Camera Unit is mounted to the camera as described on
Mounting the CopperHead 3400 Camera Unit to the Camera
2 The PowerPlus Unit is attached to the CopperHead 3400 Camera Unit in place of the
battery. It is attached in the same manner as the camera battery.
Fig. 4-6: Power Wafer connector
PowerPlus for use with
Powered Base Station and
Hybrid cable