Grass Valley Aurora Playout v.6.5 - Manual (Page 99)

1. Select the completed sequence in the Aurora Edit Bin.
If you have the completed sequence open in Aurora Edit, it is already selected;
click
Save before sending to make sure you send the latest version.
2. Press F2 on the keyboard or click the Send to File button in the toolbar.
The Send To Selected Destinations window appears, displaying the list of open
Aurora Playout placeholders. If you linked the sequence to a Aurora Playout
placeholder, that placeholder is highlighted.
3. If not already selected, click the checkbox for your media server’s location.
NOTE: Toggling the Missing Clips Only button to off displays previously
sent placeholders with media. You can also link a sequence to one of these
placeholders, which overwrites the media with the new content.
4. If you haven’t linked the sequence to a placeholder, select one to assign to your
completed sequence.
5. Enter an Editorial Duration for the sequence, if desired.
When sending a linked story to a Aurora Playout destination, you have the
opportunity to change the Editorial Duration. To enter a duration, type it into
the green timecode Editorial Duration field at the bottom of the window, not by
changing the Editorial Duration property of the placeholder.
NOTE: Editorial Duration only affects the Duration Column in the ENPS
newsroom computer system.
The duration is sent back to the Newsroom Computer System as the actual on-air
duration of the sequence for more accurate rundown timing.
6. Click Send .
19 November 2008 Aurora Playout User Guide 99
Editing and Aurora Playout