Defining function keys – Grass Valley Aurora Playout v.6.5 User Manual
Page 49
To assign the function of a GPI output, select the channel it affects, the command
in Aurora Playout that triggers GPI output and the GPI output number.
Description
Options
Setting
Check Enable General Purpose Output to allow
Aurora Playout to trigger GPI outputs.
On (checked); Off
(unchecked)
Enable GPI
Output
Select the channel that will trigger the GPI
output.
- 6
Channel
The output is set when the channel is cued;
reset when the channel is playing or if the clip
is ejected.
Cued
Command
The output is set when the channel is playing;
reset when the channel is stopped or the clip is
ejected.
Playing
The output is set when the channel is in loop
play mode; reset if not in loop play mode.
Loop Play
The output is set when the Jog Forward or Jog
Backward buttons are pressed; reset when the
Jog Forward
Jog Backward
Play, Stop, or Eject buttons are pressed, or
when the channel is re-cued.
The output is set when the playing channel
reaches End Blip 1; reset when the channel is
stopped or the clip is ejected.
End Blip 1 (Hold till
End of Clip)
The output is set when the playing channel
reaches End Blip 2; reset when the channel is
stopped or the clip is ejected.
End Blip 2 (Hold till
End of Clip)
Select the GPI output you want to activate.
1-32 (depending on
your configuration)
GP Output
After configuring your GPI inputs and outputs, you can see the overview of your
current GPI setting by clicking the
button.
Defining Function Keys
19 November 2008
Aurora Playout User Guide
49
Configuring Aurora Playout