Dhcp relay agent configuration, Introduction to dhcp relay agent, Application environment – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 52: Fundamentals, Chapter
41
DHCP relay agent configuration
This chapter includes these sections:
•
Introduction to DHCP relay agent
•
DHCP relay agent configuration task list
•
Displaying and maintaining the DHCP relay agent
•
DHCP relay agent configuration examples
•
Troubleshooting DHCP relay agent configuration
NOTE:
•
The term "switch" or "device" in this document refers to the switching engine on a WX3000E wireless
switch.
•
The WX3000E series comprises WX3024E and WX3010E wireless switches.
•
The port numbers in this document are for illustration only.
•
The DHCP relay agent configuration is supported only on VLAN interfaces.
Introduction to DHCP relay agent
Application environment
Via a relay agent, DHCP clients communicate with a DHCP server on another subnet to obtain
configuration parameters. DHCP clients on different subnets can contact the same DHCP server rather
than having a DHCP server on each subnet. This centralizes management and reduces cost reduction.
Fundamentals
shows a typical application of the DHCP relay agent.
Figure 19 DHCP relay agent application
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points