beautypg.com

H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 126

background image

115

Follow these steps to configure parameters related to RA messages:

To do…

Use the command…

Remarks

Enter system view

system-view

Configure the hop limit

ipv6 nd hop-limit value

Optional
64 by default.

Enter interface view

interface interface-type
interface-number

Configure the prefix information
in RA messages

ipv6 nd ra prefix { ipv6-address
prefix-length |

ipv6-address/prefix-length }

valid-lifetime preferred-lifetime
[ no-autoconfig | off-link ] *

Optional
By default, no prefix information is
configured for RA messages, and the

IPv6 address of the interface sending RA

messages is used as the prefix
information with valid lifetime 2592000

seconds (that is, 30 days) and preferred

lifetime 604800 seconds (that is, 7
days).

Turn off the MTU option in RA
messages

ipv6 nd ra no-advlinkmtu

Optional
By default, RA messages contain the
MTU option.

Set the M flag bit to 1

ipv6 nd autoconfig
managed-address-flag

Optional
By default, the M flag bit is set to 0 and
hosts acquire IPv6 addresses through

stateless autoconfiguration.

Set the O flag bit to 1

ipv6 nd autoconfig other-flag

Optional
By default, the O flag bit is set to 0 and
hosts acquire other configuration

information through stateless

autoconfiguration.

Configure the router lifetime in
RA messages

ipv6 nd ra router-lifetime value

Optional
1800 seconds by default.

Set the NS retransmission timer ipv6 nd ns retrans-timer value

Optional
By default, the local interface sends NS
messages at 1000 millisecond intervals,

and the value of the Retrans Timer field
in RA messages sent by the local

interface is 0. The interval for

retransmitting an NS message is
determined by the receiving device.

Set the reachable time

ipv6 nd nud reachable-time
value

Optional
By default, the neighbor reachable time
on the local interface is 30000

milliseconds, and the value of the

Reachable Time field in the RA messages

sent by the local interface is 0. The
neighbor reachable time is determined

by the receiving device.