Troubleshooting ipv6 basics configuration, Symptom, Solution – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 139
128
The output shows that Switch B can ping Switch A and the host.
Troubleshooting IPv6 basics configuration
Symptom
The peer IPv6 address cannot be pinged.
Solution
•
Use the display current-configuration command in any view or the display this command in system
view to verify that IPv6 is enabled.
•
Use the display ipv6 interface command in any view to verify that the IPv6 address of the interface
is correct and the interface is up.
•
Use the debugging ipv6 packet command in user view to enable the debugging for IPv6 packets to
help locate the cause.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points