Deleting a file at the cli, Dealing with password loss, Bootware password loss – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 70: User password loss
62
Deleting a file at the CLI
You can use the delete [ /unreserved ] file-url command in user view to delete a file.
•
/unreserved: Deletes the file immediately without placing it into the Recycle Bin.
•
file-url: Name of the file to be deleted.
# Delete
startup.cfg
from the root directory.
Delete flash:/startup.cfg?[Y/N]:y
%Delete file flash:/startup.cfg...Done.
The file startup.cfg is now temporarily in the Recycle Bin. You can use the undelete command to restore
the file from the Recycle Bin.
# Restore the file startup.cfg from the Recycle Bin.
Undelete flash:/startup.cfg? [Y/N]:y
% Undeleted file flash:/startup.cfg.
Dealing with password loss
BootWare password loss
If you forget the BootWare password, contact your local dealer. The technical support staff will help you
log in to the system and set a new password.
To change the BootWare password, enter the BootWare main menu, select 5, and follow the instructions.
The following information is displayed on the terminal:
please input old password:
Please input new password:
Please input new password again:
Password Set Successfully.
NOTE:
•
Once you enter a wrong old password or different new passwords, the password modification operation
fails and the system exits this operation.
•
A BootWare password can contain up to 32 characters, including printable characters such as letters,
numerals, and punctuations.
User password loss
Your login will be refused if you forget the user password. Set a new user password by following the steps
below:
1.
Select 6 from the BootWare main menu to start the system without loading the system
configuration.
The following information appears:
Flag Set Success.
2.
When the BootWare main menu appears again, select 0 to restart the system.