beautypg.com

H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 32

background image

24

3.

Select the serial port to be used from the Connect using list, and click OK.

Figure 28 Set the serial port used by the HyperTerminal connection

4.

Set Bits per second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None,
and click OK.

Figure 29 Set the serial port parameters

NOTE:

To restore the default settings, click Restore Defaults.

5.

Select File > Properties in the HyperTerminal window.

This manual is related to the following products:
See also other documents in the category H3C Technologies Routers: