Starting and configuring the switch, Setting up a configuration environment, Connecting the switch to a configuration terminal – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 31: Setting terminal parameters
23
Starting and configuring the switch
Setting up a configuration environment
Connecting the switch to a configuration terminal
For more information about connecting the switch to a configuration terminal, see the chapter “Installing
the switch (page
).”
Setting terminal parameters
To configure and manage the switch, you must run a terminal emulator program on the console terminal.
The following are the required terminal settings:
•
Bits per second—9,600
•
Data bits—8
•
Parity—None
•
Stop bits—1
•
Flow control—None
•
Emulation—VT100
To set terminal parameters, for example, on a Windows XP HyperTerminal:
1.
Select Start > All Programs > Accessories > Communications > HyperTerminal.
The Connection Description dialog box appears.
2.
Enter the name of the new connection in the Name field and click OK.
Figure 27 Connection description