H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 57)

49
The serial communication baud rate of the switch has been changed to 115,200 bps while that of
the terminal is still 9,600 bps, the two sides cannot communicate with each other. Change the
baud rate to 115,200 bps in HyperTerminal.
a. Disconnect the terminal connection in HyperTerminal.
Figure 43 Disconnect the terminal connection
b. Select File > Properties. In the Properties dialog box, click Configure… and then select
115,200 from the Bits per second list.
Figure 44 Modify the baud rate
c. Select Call > Call to reestablish the connection.