H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 39)

31
Ethernet ports
Ethernet ports
The WX3024E provides twenty-four 10/100/1000Base-T Ethernet ports and four 1000Base-X SFP ports.
Each SFP port and the corresponding 10/100/1000Base-T Ethernet port jointly form a combo interface.
Only one of the two ports of a combo interface can be used at a time.
Table 9 SFP and copper Ethernet ports of the WX3024E that form the combo interfaces
1000Base-X SFP port 10/100/1000Base-T Ethernet port
25 22
26 24
27 21
28 23
The copper Ethernet port status LEDs are above the RJ-45 sockets. The triangular pointer above each LED
indicates which port the LED is for. The fiber Ethernet ports of the WX3024E support 1000 Mbps full
duplex. The fiber port status LEDs are above the 1000Base-X SFP ports, each indicating the status of the
corresponding fiber port.
RJ-45 connectors
The 10/100/1000M copper Ethernet ports of the WX3024E work with Category-5 twisted pair cables
with RJ-45 connectors, as shown in Figure 33 .
Figure 33 RJ-45 connector
LC connectors
A fiber connector is mainly used for the removable connection between fiber tunnels. This facilitates the
testing and maintenance of the fiber system and makes fiber inter-connections more flexible.
The WX3024E supports only LC connectors.
Figure 34 LC connector