H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 41)

33
LED Mark Status Description
10/100/1000
Base-T Ethernet port
status LED
(yellow/green)
—
Steady green A 1000 Mbps link is present on the port.
Flashing green (33 Hz)
The port is receiving or transmitting data at
1000 Mbps.
Steady yellow A 10/100 Mbps link is present on the port.
Flashing yellow (33 Hz)
The port is receiving or transmitting data at
10/100 Mbps.
Off No link is present on the port.
Gigabit SFP port
status LED (green)
—
Steady green A 1000 Mbps link is present on the port.
Flashing green (33 Hz)
The port is receiving or transmitting data at
1000 Mbps.
Off No link is present on the port.
Expansion slot LED
(yellow/green)
MOD
1 (or
MOD
2)
Steady green An interface module is connected.
Steady yellow
The slot does not support the interface module
installed in it.
Flashing green
The interface module is receiving or
transmitting data.
Flashing yellow The interface module failed the POST.
Off
No interface module is present in the slot or the
interface module is not connected.
Numbering interfaces
The WX3024E provides 30 fixed interfaces numbered GigabitEthernet 1/0/1 through GigabitEthernet
1/0/30, among which:
• GigabitEthernet 1/0/1 through GigabitEthernet 1/0/24 are 10/100/1000 Base-T Ethernet ports,
with the last part of the port numbers indicated on the front panel;
• GigabitEthernet 1/0/25 through GigabitEthernet 1/0/28 are 1000Base-X SFP fiber ports, with
the last part of the port numbers indicated on the front panel;
• GigabitEthernet 1/0/29 and GigabitEthernet 1/0/30 are internal interfaces for connecting the
access control engine.
The WX3024E provides two 10 GE interface card slots. The interfaces on the interface cards installed in
these slots are numbered TenGigabitEthernet 1/1/1 and TenGigabitEthernet 1/2/1.