H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 35

.....................................................................................

.........Done!

System application is starting...

User interface aux0 is available.

Press ENTER to get started.

Press Enter at the prompt, and you can configure the switch when the prompt appears.

NOTE:

During the startup process, the CPLD will be automatically upgraded to the latest version, if any. The
system will display “The board cpld update successfully, please repower device.” after the upgrade

process. At this prompt, power off and restart the switch so that the new CPLD version takes effect.

This manual is related to the following products:

H3C WX3000 Series Unified Switches