H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 67)

59
[H3C]local-user guest // Create user account
guest
[H3C-luser- guest]service-type ftp // Set the user type to
FTP
[H3C-luser- guest]password simple 123456 // Set the password to
123456
3. Maintain the switch
a. Start the FTP client application on the PC after enabling FTP server and setting the username
and password on the switch.
This example assumes that you use Microsoft FTP Client provided in Windows XP.
b. Open a DOS prompt window, and enter ftp at the DOS prompt.
C:\Documents and Settings\Administrator>ftp
ftp> // The system prompt changed to
ftp>
ftp> open 192.168.0.2 // Connect to the device
Connected to 192.168.0.2.
220 FTP service ready.
User (192.168.0.2:(none)): guest // Enter the username set on the device
331 Password required for guest
Password: // Enter the password 123456
230 User logged in.
c. To back up wx3000.bin from the switch to the PC, use the following command:
ftp> binary // Set the transfer mode to binary mode
200 Type set to I.
ftp> lcd c:\temp // Change the local file directory
Local directory now C:\temp.
ftp> get wx3000.bin wx3000.bin // Back up the file from the switch to the PC
200 Port command okay.
150 Opening BINARY mode data connection for /wx3000.bin.
226 Transfer complete.
ftp: 35454328 bytes received in 41.62Seconds 851.87Kbytes/sec.
d. To restore the backup to the switch, use the following command:
ftp> put wx3000.bin wx3000.bin
200 Port command okay.
150 Opening BINARY mode data connection for wx3000.bin.
226 Transfer complete.
ftp: 35454328 bytes sent in 20.52Seconds 1727.37Kbytes/sec.
ftp> quit
221 Server closing.
Maintaining the system software image files and
configuration files
You can modify the types of the files on the access control engine and view the file information through
the file control submenu or at the CLI.
NOTE:
You can maintain the files on the switching engine only at the CLI, rather than the BootWare menu.