H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 59)

51
2. Select Transfer > Send file in the HyperTerminal window.
The following dialog box appears.
Figure 46 File transmission dialog box
3. Click Browse to select the system software image file to be downloaded, select Xmodem from the
Protocol list, and click Send.
The following dialog box appears:
Figure 47 Sending the system software image file using XMODEM
After download completion, the terminal displays the following information:
Download successfully!
35454336 bytes downloaded!
4. Change the baud rate from 115200 bps back to 9600 bps in HyperTerminal and reboot the
switch.