H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 68)

60
Select 4 from the BootWare main menu to enter the file control submenu. The following information is
displayed:
==============================================================
|Note:the operating device |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Delete File |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-3):
Displaying all files
Displaying all files through the BootWare menu
Select 1 from the file control submenu. The following information appears:
Display all file(s) in flash:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
============================================================================
|NO. Size(B) Time Type Name |
|1 35454328 Jan/18/2011 09:02:23 M wx3000.bin |
|2 4204 Jan/17/2011 15:43:25 N/A system.xml |
|3 2334 Jan/17/2011 15:43:26 N/A test.cfg |
|4 1039 Jan/04/2011 17:21:52 N/A startup.cfg |
============================================================================
Displaying all files at the CLI
dir
Directory of flash:/
0 -rw- 1039 Jan 04 2011 17:21:52 startup.cfg
1 -rw- 35454328 Jan 18 2011 09:02:23 wx3000.bin
2 -rw- 4204 Jan 17 2011 15:43:25 system.xml
3 -rw- 2334 Jan 17 2011 15:43:26 test.cfg
1015424 KB total (979500 KB free)
Setting the system software image file type
Setting the system software image file type in the BootWare menu
1. Select 2 from the file control submenu.
The following information appears:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
============================================================================
|NO. Size(B) Time Type Name |
|1 35454328 Jan/18/2011 09:02:23 M wx3000.bin |
|0 Exit |
============================================================================
Enter file No:
2. Enter the file number at the prompt above. In this example, type 1 for wx3000.bin, and press
Enter.