H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 54)

46
NOTE:
•
To enter the BootWare menu, you must press Ctrl + B within 4 seconds when the system prompts “Press
Ctrl+B to enter extended boot menu”.
• To enter the BootWare menu after the system software image file is decompressed, restart the switch.
Press Ctrl + B when the system prompts “Press Ctrl+B to enter extended boot menu”. Then, the system
prompts you to enter the BootWare password:
Please input BootWare password:
Enter the BootWare password. The system displays the BootWare main menu.
CAUTION:
•
The initial BootWare password is null.
• If you fail to enter the correct password three times in a row, the system will be halted and all you can do
is to restart the system.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
=====================================================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Modify BootWare Password |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Enter your choice(0-9):
BootWare submenus
Serial submenu
Select 2 from the BootWare main menu to enter the serial submenu. The following information is
displayed:
======================================================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-5):