H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 53)

45
Item Description
If a file with the same name already
exists, overwrite it without any
prompt
Specify whether to overwrite the file with the same name.
If you do not select this option, when a file with the same name exists,
the system prompts that the file already exists, and the system software
image file cannot be upgraded.
Reboot after the upgrade is finished
Set whether to reboot the access controller to make the configuration
take effect after the file is upgraded.
CAUTION:
Software upgrade takes a period of time. Do not perform any operation on the web interface during the
upgrade process to avoid interruption.
BootWare menus
BootWare main menu
When the switch is powered on or restated, the terminal first displays the following information:
System is starting...
Then the following information appears:
Booting Normal Extend BootWare....
***************************************************************************
* *
* H3C WX3024E BootWare, Version 1.02 *
* *
***************************************************************************
Copyright (c) 2004-2010 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Nov 23 2010
CPU Type : XLS208
CPU L1 Cache : 32KB
CPU Clock Speed : 750MHz
Memory Type : DDR2 SDRAM
Memory Size : 512MB
Memory Speed : 533MHz
BootWare Size : 768KB
Flash Size : 1024MB
CPLD Version : 004
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
To enter the extended BootWare menu, press Ctrl + B; otherwise, the system will start loading and
decompressing the system software image file.