H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 19)

11
5. Hold the bottom of the switch with one hand and the front part with the other hand, and gently push
the switch into the rack. See Figure 10 .
Figure 10 Install the switch using front and rear mounting brackets (I)
(1) Screw for fixing the front mounting bracket (2) Front mounting bracket
(3) Front square-holed bracket
(4) Weight-bearing screw
(5) Rear mounting bracket (6) Screw for fixing the rear mounting bracket
(7) Rear square-holed bracket
CAUTION:
After pushing the switch into the rack, make sure that the upper edges of the rear mounting brackets fixed
on the rack have close contact with the weight-bearing screws on the switch. See
Figure 11 .
Figure 11 Install the switch using front and rear mounting brackets (II)
(1) Rear mounting bracket (2) Weight-bearing screw (3) Rear square-holed bracket
1
2
3