H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 24
16
Figure 18 Ground the switch by burying the grounding conductor into the earth ground
(1) AC power receptacle
(2) Grounding screw
(3) Grounding cable
(5) Angle iron
(4) Earth
Grounding the switch through the PE wire of an AC power cord
CAUTION:
Use this method only when the switch is AC powered.
If the installation site has no grounding strips or earth ground, you ground an AC-powered switch through
the protective earth (PE) wire of the power cord, and check that the ground contact in the power outlet is
well connected to the ground in the power distribution room or on the AC transformer side.
Figure 19 Ground the switch through the PE wire of an AC power cord
(1) Three-core AC power cord
(2) AC power receptacle
(3) PE wire
(4) Power transformer
(5) Earth
1
2
3
4
5