H3C Technologies H3C SR8800 - Manual (Page 75)

67
Step Command Remarks
6. Configure the waiting
time before the MFR
bundle link resends
hello messages.
mfr timer ack seconds
Optional.
The default setting is 4 seconds.
7. Configure the
maximum times that
the MFR bundle link
can resend hello
messages.
mfr retry number
Optional.
The default setting is 2.
Displaying and maintaining multilink frame relay
Task Command Remarks
Display configuration and status of
an MFR interface.
display interface mfr
[ interface-number |
interface-number:subnumber ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display configuration and statistics
of an MFR bundle and bundle
links.
display mfr [ interface interface-type
interface-number | verbose ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Clear statistics of MFR interfaces.
reset counters interface [ mfr
[ interface-number |
interface-number.subnumber ] ]
Available in user view
Multilink frame relay configuration example
Network requirements
As shown in Figure 18 , use the multilink frame relay protocol to bundle the two serial ports to provide
higher bandwidth.
Figure 18 Network diagram
Configuration procedure
1. Configure Router A:
# Create and configure MFR interface MFR 3/1/12.
system-view
[RouterA] interface MFR 3/1/12
[RouterA-MFR3/1/12] ip address 10.140.10.1 255.255.255.0
[RouterA-MFR3/1/12] fr interface-type dte
Router A Router B
S 3/1/7:0 S 3/1/7:0
S 3/1/8:0 S 3/1/8:0
MFR3/1/12
10.140.10.1/24
MFR3/1/12
10.140.10.2/24