H3C Technologies H3C SR8800 - Manual (Page 47)

39
# Configure local authentication for the PPP users in the default ISP domain system.
[RouterA] domain system
[RouterA-isp-system] authentication ppp local
[RouterA-isp-system] quit
2. Configure Router B:
# Configure username and password for Router A on Router B.
system-view
[RouterB] local-user rta
[RouterB-luser-rta] password simple rtaaaaaaaaa
[RouterB-luser-rta] service-type ppp
[RouterB-luser-rta] quit
# Create an MP-group interface and assign an IP address to it.
[RouterB] interface Mp-group 4/1/1
[RouterB-Mp-group4/1/1] ip address 111.1.1.2 24
[RouterB-Mp-group4/1/1] quit
# Configure Serial 4/1/9/1:0.
[RouterB] interface Serial 4/1/9/1:0
[RouterB-Serial4/1/9/1:0] link-protocol ppp
[RouterB-Serial4/1/9/1:0] ppp authentication-mode pap domain system
[RouterB-Serial4/1/9/1:0] ppp pap local-user rtb password simple rtbbbbbbbbb
[RouterB-Serial4/1/9/1:0] ppp mp Mp-group 4/1/1
[RouterB-Serial4/1/9/1:0] shutdown
[RouterB-Serial4/1/9/1:0] undo shutdown
[RouterB-Serial4/1/9/1:0] quit
# Configure Serial 4/1/9/2:0.
[RouterB] interface Serial 4/1/9/2:0
[RouterB-Serial4/1/9/2:0] link-protocol ppp
[RouterB-Serial4/1/9/2:0] ppp authentication-mode pap domain system
[RouterB-Serial4/1/9/2:0] ppp pap local-user rtb password simple rtbbbbbbbbb
[RouterB-Serial4/1/9/2:0] ppp mp Mp-group 4/1/1
[RouterB-Serial4/1/9/2:0] shutdown
[RouterB-Serial4/1/9/2:0] undo shutdown
[RouterB-Serial4/1/9/2:0] quit
# Configure local authentication for the PPP users in the default ISP domain system.
[RouterB] domain system
[RouterB-isp-system] authentication ppp local
[RouterB-isp-system] quit
3. Verify the configuration:
[RouterA] display ppp mp
Mp-group is Mp-group4/1/1
max-bind: 16, fragment:enable, min-fragment: 512
Bundle Multilink, 2 members, Master link is Mp-group4/1/1
Peer's endPoint descriptor: Mp-group4/1/1
Bundle Up Time: 2007/06/29 10:45:11:562
0 lost fragments, 0 reordered, 0 unassigned
Sequence: 0/0 rcvd/sent
The member channels bundled are: