H3C Technologies H3C SR8800 - Manual (Page 35)

27
Step Command Remarks
9. Create an ISP domain, or enter an
existing ISP domain view.
domain isp-name
Optional.
To configure the ppp
authentication-mode
command with an ISP
domain specified which is
not the default domain
system, configure this
command before
configuring the ppp
authentication-mode
command.
10. Configure local authentication for
the PPP users.
authentication ppp local Optional.
NOTE:
For more information about local user configuration and domain configuration, see Security
Configuration Guide.
2. Configuring the supplicant
To configure the supplicant:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Assign a username to the
CHAP supplicant.
ppp chap user username
The username you assign to the
supplicant here must be the same as
the local username you assign to the
supplicant on the authenticator.
4. Set the default CHAP
authentication password. ppp chap password { cipher |
simple } password
The password you set for the
supplicant here must be the same as
the password you set for the supplicant
on the authenticator.
Configuring MS-CHAP or MS-CHAP-V2 authentication
NOTE:
•
In MS-CHAP or MS-CHAP-V2 authentication, an H3C device can only be an authenticator
• Password change in MS-CHAP-V2 authentication does not support local authentication, but is used only
in RADIUS authentication.
To configure the authenticator for MS-CHAP or MS-CHAP-V2 authentication:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view. interface interface-type interface-number N/A