H3C Technologies H3C SR8800 - Manual (Page 32)

24
Step Command Remarks
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Configure the local router to
authenticate the peer using
PAP.
ppp authentication-mode pap
[ [ call-in ] domain isp-name ] By default, PPP authentication is
not performed.
4. Return to system view. quit N/A
5. Create a local user account. local-user username
This command also leads you to
local user view.
6. Configure a password for the
local user.
password { cipher | simple }
password
N/A
7. Configure the service type of
the local user as PPP.
service-type ppp N/A
8. Return to system view. quit N/A
9. Create an ISP domain or enter
an existing ISP domain view.
domain isp-name
Optional.
To configure the ppp
authentication-mode command
with an ISP domain specified
which is not the default domain
system, configure this command
before configuring the ppp
authentication-mode command.
10. Configure local authentication
for the PPP users.
authentication ppp local Optional.
NOTE:
For more information about local user configuration and domain configuration, see Security
Configuration Guide.
Configuring the supplicant
To configure the supplicant:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Configure the PAP username
and password sent by the
local router to the peer when
the local router is
authenticated by the peer
using PAP.
ppp pap local-user username
password { cipher | simple }
password
By default, when being
authenticated by the peer using
PAP, the local router sends null
username and password to the
peer.
Configuring CHAP authentication
Depending on whether the authenticator is configured with a username or not, the configuration of
CHAP authentication falls into the following two types: