H3C Technologies H3C SR8800 - Manual (Page 18)

10
NOTE:
•
For more information about Layer 3 VE interfaces, see Interface Configuration Guide.
• The eoapad enable command is also enabled on the ATM subinterfaces when it is enabled on the ATM
main interface.
Configure EoA
EoA enables a PVC to carry Layer 2 Ethernet frames.
To configure EoA:
Step Command Remarks
1. Enter system view. system-view N/A
2. Create a VE-bridge interface.
interface ve-bridge interface-number N/A
3. Return to system view. quit N/A
4. Enter ATM interface view.
interface atm { interface-number |
interface-number.subnumber }
N/A
5. Enable packet padding on the
interface.
eoapad enable
Optional.
Disabled by default.
6. Create a PVC and enter the PVC
view.
pvc { pvc-name [ vpi/vci ] | vpi/vci } N/A
7. Configure an EoA mapping for the
PVC.
map bridge ve-bridge interface-number N/A
NOTE:
The eoapad enable command is also enabled on the ATM subinterfaces when it is enabled on the ATM
main interface.
Displaying and maintaining ATM
Task Command Remarks
Display ATM interface
information.
display atm interface atm [ interface-number |
interface-number.subnumber ] [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display the configuration and
state of ATM interfaces.
display interface atm [ interface-number |
interface-number.subnumber ] [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display information about
PVCs.
display atm pvc-info [ interface atm
{ interface-number |
interface-number.subnumber } [ pvc { pvc-name
[ vpi/vci ] | vpi/vci } ] ] [ | { begin | exclude |
include } regular-expression ]
Available in any view