H3C Technologies H3C SR8800 - Manual (Page 38)

30
Step Command Remarks
2. Assign an IP address of a global
address pool for the peer or
specify the IP address to be
allocated to the peer.
• Approach I:
Define a global address pool
and bind it to the interface:
a. ip pool pool-number
low-ip-address
[ high-ip-address ]
b. interface interface-type
interface-number
c. remote address pool
[ pool-number ]
• Approach II:
Specify the IP address to be
allocated to the peer:
d. interface interface-type
interface-number
e. remote address
ip-address
Use either approach.
As for the remote address pool
command, if the pool-number
argument is not provided, the
global address pool numbered 0
is used.
To configure the local end as the server (for scenarios where PPP authentication is enabled):
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter domain view. domain domain-name N/A
3. Define domain address pool.
ip pool pool-number low-ip-address
[ high-ip-address ]
N/A
4. Return to system view. quit N/A
5. Enter interface view.
interface interface-type
interface-number
N/A
6. Specify the address pool for
IP address allocation. remote address pool
[ pool-number ]
If you execute the remote address
pool command without providing
the pool-number argument, all the
address pools in the domain are
used in turn for IP address
allocation.
7. Disable the peer end from
using the locally configured IP
address.
ppp ipcp remote-address forced
Optional.
By default, the peer end is allowed
to use the locally configured IP
address. In this case, the local end
does not allocate an IP address to
the peer end if the latter already
has an IP address.
Configuring MP
NOTE:
The system does not support cross-card MP bundles.