H3C Technologies H3C SR8800 - Manual (Page 20)

12
Figure 4 Network diagram
Configuration procedure
1. Configure Router A:
# Enter the ATM main interface, and configure an IP address for it.
system-view
[RouterA] interface Atm 3/1/1
[RouterA-Atm3/1/1] ip address 202.38.160.1 255.255.255.0
# Create the PVCs to Router B and Router C and configure them to carry IP.
[RouterA-Atm3/1/1] pvc to_b 0/40
[RouterA-atm-pvc-Atm3/1/1-0/40-to_b] map ip 202.38.160.2 broadcast
[RouterA-atm-pvc-Atm3/1/1-0/40-to_b] quit
[RouterA-Atm3/1/1] pvc to_c 0/41
[RouterA-atm-pvc-Atm3/1/1-0/41-to_c] map ip 202.38.160.3 broadcast
2. Configure Router B:
# Enter the ATM main interface, and configure an IP address for it.
system-view
[RouterB] interface Atm 3/1/1
[RouterB-Atm3/1/1] ip address 202.38.160.2 255.255.255.0
# Create the PVCs to Router A and Router C and configure them to carry IP.
[RouterB-Atm3/1/1] pvc to_a 0/50
[RouterB-atm-pvc-Atm3/1/1-0/50-to_a] map ip 202.38.160.1 broadcast
[RouterB-atm-pvc-Atm3/1/1-0/50-to_a] quit
[RouterB-Atm3/1/1] pvc to_c 0/51
[RouterB-atm-pvc-Atm3/1/1-0/51-to_c] map ip 202.38.160.3 broadcast
3. Configure Router C:
# Enter the ATM main interface, and configure an IP address for it.
system-view
[RouterC] interface Atm 3/1/1
[RouterC-Atm3/1/1] ip address 202.38.160.3 255.255.255.0
# Create the PVCs to Router A and Router B and configure them to carry IP.