H3C Technologies H3C S5560 Series Switches - Manual (Page 390)

374
Step Command Remarks
3. Configure OSPFv3 to
redistribute routes from other
routing protocols.
import-route protocol [ process-id |
all-processes | allow-ibgp ] [ cost cost |
nssa-only | route-policy
route-policy-name | tag tag | type type ]
*
By default, route redistribution
is disabled.
4. (Optional.) Configure
OSPFv3 to filter redistributed
routes.
filter-policy { acl6-number | prefix-list
prefix-list-name } export [ protocol
[ process-id ] ]
By default, OSPFv3 accepts
all redistributed routes.
This command filters only
routes redistributed with the
import-route command. If the
import-route command is not
configured, executing this
command does not take
effect.
Redistributing a default route
The import-route command cannot redistribute a default external route. Perform this task to redistribute a
default route.
To redistribute a default route:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter OSPFv3 view.
ospfv3 [ process-id | vpn-instance
vpn-instance-name ] *
N/A
3. Redistribute a default
route.
default-route-advertise [ [ always |
permit-calculate-other ] | cost cost |
route-policy route-policy-name | tag tag |
type type ] *
By default, no default route is
redistributed.
Configuring tags for redistributed routes
Perform this task to configure tags for redistributed routes to identify information about protocols. For
example, when redistributing IPv6 BGP routes, OSPFv3 uses tags to identify AS IDs.
To configure a tag for redistributed routes:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter OSPFv3 view.
ospfv3 [ process-id | vpn-instance
vpn-instance-name ] *
N/A
3. Configure a tag for
redistributed routes.
default tag tag
By default, the tag of
redistributed routes is 1.