H3C Technologies H3C S5560 Series Switches - Manual (Page 282)

266
Step Command Remarks
3. Specify a 6PE peer or peer
group and its AS number. peer { group-name | ip-address
[ mask-length ] } as-number as-number No 6PE peer is specified by
default.
4. Enter BGP IPv6 unicast
address family view.
address-family ipv6 [ unicast ] N/A
5. Enable BGP to exchange
IPv6 unicast routing
information with the 6PE
peer or peer group.
peer { group-name | ip-address
[ mask-length ] } enable This function is disabled by
default.
6. Enable BGP to exchange
labeled IPv6 routes with the
6PE peer or peer group.
peer { group-name | ip-address
[ mask-length ] } label-route-capability This function is disabled by
default.
Configuring optional 6PE capabilities
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter BGP view. bgp as-number N/A
3. Enter BGP IPv6 unicast
address family view.
address-family ipv6 [ unicast ] N/A
4. Advertise COMMUNITY
attribute to the 6PE peer or
peer group.
peer { group-name | ip-address
[ mask-length ] } advertise-community By default, the COMMUNITY
attribute is not advertised.
5. Advertise extended
community attribute to the 6PE
peer or peer group.
peer { group-name | ip-address
[ mask-length ] }
advertise-ext-community
By default, the extended
community attribute is not
advertised.
6. Allow the local AS number to
appear in routes from the 6PE
peer or peer group and
specify the repeat times.
peer { group-name | ip-address
[ mask-length ] } allow-as-loop
[ number ]
By default, the local AS number
is not allowed to appear in
routes from the 6PE peer or
peer group.
7. Specify an AS path list to filter
routes advertised to or
received from the 6PE peer or
peer group.
peer { group-name | ip-address
[ mask-length ] } as-path-acl
as-path-acl-number { export | import }
By default, no AS path list is
specified.
8. Specify an IPv6 ACL to filter
routes advertised to or
received from the 6PE peer or
peer group.
peer { group-name | ip-address
[ mask-length ] } filter-policy
acl6-number { export | import }
By default, no ACL is specified.
9. Specify an IPv6 prefix list to
filter routes advertised to or
received from the 6PE peer or
peer group.
peer { group-name | ip-address
[ mask-length ] } prefix-list
ipv6-prefix-name { export | import }
By default, no IPv6 prefix list is
specified.
10. Specify a routing policy to
filter routes advertised to or
received from the 6PE peer or
peer group.
peer { group-name | ip-address
[ mask-length ] } route-policy
route-policy-name { export | import }
By default, no routing policy is
specified.