Wired port routing – Amped Wireless TAP-EX2 - High Power Touch Screen AC750 Wi-Fi Range Extender User Manual
Page 88
TAP-EX2
USER’S GUIDE
87
87
Network Settings: Wired Port Routing
If the Range Extender is connected to a dual band router, the Range
Extender will automatically route the traffic from the device connected
to the Range Extender’s wired port through the 5GHz Home Network to
access the web with the fastest speeds. If you choose, you may adjust
this setting so that all wired traffic is routed through the 2.4GHz Home
Network connection instead.
If the Range Extender is only connected to a single Home Network, it
will automatically route all wired traffic through the Home Network
connection that is active.
This manual is related to the following products:
- TAP-EX - High Power Touch Screen Wi-Fi Range Extender G8SW - ProSeries 8-Port Gigabit Switch G16SW - ProSeries 16-Port Gigabit Switch APR175P - ProSeries High Power AC1750 Wi-Fi Access Point / Router RTA1750 - High Power AC1750 Wi-Fi Router R20000G - High Power Wireless-N 600mW Gigabit Dual Band Router R10000 - High Power Wireless-N 600mW Smart Router R10000G - High Power Wireless-N 600mW Gigabit Router RTA15 - High Power 700mW Dual Band AC Wi-Fi Router RTA1200 - High Power AC1200 Wi-Fi Router RTA2600 - High Power AC2600 Wi-Fi Router with MU-MIMO TAP-R2 - High Power Touch Screen AC750 Wi-Fi Router